How to program a Panasonic KX-TVS95 series voice processor
NOTE: on this website, "voice processor,"
 voice processing system," and "VPS"
 mean the same thing.
 
 
call 1 888 ABLE 999  Email
home  order online  forum  AbleComm.com

the world's best source of information on Panasonic KX-TVS voice processing systems

 
  • This page is for use with Panasonic KX-TVS95 voice processor.
  • This page will help you get your voice processor working in a typical business or home environment, providing both automated attendant and voicemail service, with a Panasonic KX-TD, KX-TA, or KX-TAW series phone system.
  • The work on this page is done AFTER you have made programming changes in your phone system, to prepare it for use with your voice processor.
  • Some of your work will be done from a PC, and some will be done from a phone. IMPORTANT: If you have previously worked with older Panasonic voice processors, be sure to see System Security.
  • The voice processor programming instructions on this page are based on using terminal software, such as HyperTerminal (which comes with Windows), to access the DOS-like programming imbedded inside the voice processor.
  • You can modify the suggested settings to provide the best operation for your particular needs.
  • The screen shots shown on this page are for guidance only. What you see on your PC may be different.
  • Some material on this page is © 2003 Panasonic Communications Co. Ltd.
  • This is a big page, but if your follow it properly, you should be able to program your VPS in less than an hour.
STEP 1
Connect your PC to the VPS using the AbleComm ProCable, an AbleComm ProConnector Kit  or a serial cable and null modem adapter from RadioShack. Be sure to get a cable or adapter that has the right connector for your voice processor (9-pin). 

>>You CAN'T program your voice processor with a USB cable.<<

Instead of mounting your voice processor next to the phone system control unit, you can mount it near one of your computers, so it's easy to make programming changes. It won't take up much space, and the wiring is very simple -- much simpler than extending a serial cable 50 feet.

For "long distance" programming, use the AbleComm ProConnector Kit.

 
STEP 2

>>Before starting to program the VPS, make sure it is connected to the phone system.<<
 
  • Open HyperTerminal (from Start, Programs, Accessories, Communications).
  • Click on FILE, then NEW CONNECTION. Assign a name, such as TVS95, and select an icon that you like, and click on "OK."
  • You should only have to do this step the first time you program the system.

 

 
STEP 3
 
  • A "Connect to" window should open now. In the bottom section, select Connect Using COM 1 (or whatever port you are using) and click on "OK."
  • You should only have to do this step the first time you program the system.
 
STEP 4
  • A "Port Settings" window should open next (shown below). Select 9600, 8, none, 1, none.
  • CLICK on "OK."
  • You should only have to do this step the first time you program the system.

 

 
NOTE: While programming the voice processor, the PC screen display
will often refer to your "PBX." In this case, PBX means the control unit
("KSU") of your phone system.
STEP 5
 
Your voice processor
has four tiny "DIP" switches.

Start the VPS with the switches in the following positions, to initialize the factory settings:
1 right (1)
2 left (0)
3 right (1)
4 left (0)
During programming,
you will be instructed
to move all the switches to left (0), so your settings can be saved.
1 left (0)
2 left (0)
3 left (0)
4 left (0)
 
STEP 6
After turning the power on, the system starts up in the following sequence:
1. The Power Indicator light goes on.
2. The Power Indicator light begins to flash.
3. “PORT TEST” is displayed on the screen.
4. NOTE: The screen should show "Active COs."
"COs" usually refers to lines from the phone company's Central Office. This is really STOOPID. It is really testing the ports in the VPS.
5. “SYSTEM SETUP” is displayed.

 
  • If you are programming for the first time, it's OK to see "DPT Interface Connection is not Established."
  • If you previously completed setting up the system, you should see "DPT Interface Connection is Established" or "APT Interface Connection is Established."
  • SET THE DIP SWITCH  TO POSITION ZERO. (See photo in step 5 above)
  • Press ENTER on your keyboard.
  • You should only have to do this step the first time you program the system.
STEP 7
  • If you are setting up the voice processor for the first time, type 5 for "Quick Setup," and press ENTER.
  • If the voice processor has been set up previously, you can make a different selection. You will skip steps 8 through XX?16, and possibly others.

     

 
STEP 8
 
  • In this screen, you are told to press ENTER. Please do it.
STEP 9
  • Use your cursor to select your phone system, and press ENTER.
 

IMPORTANT: While programming in HyperTerminal, you can
save a setting and move back to the previous menu by pressing the
backslash "\" key.

 
STEP 10
  • If the voice processor is connected properly to the phone system, the screen should next show "Auto Config. executing."
 
STEP 11
 
  • You should next come to the Mailbox Editing screen, which Panasonic stupidly spells "Editting."
  • This screen may automatically show some names if they had previously been programmed into your phone system.
  • Use your ENTER button to move around the screen, and type in the last names of one or more of the people who will have mailboxes, in the "OWNER" column.
  • You can do lots of mailboxes now, or just enter one and come back later.
  • To leave this screen, press "S" while your cursor is in the "MAKE" column.
STEP 12
  • You should then see the "Quick Setup - Port Service Setting" screen. We recommend that you accept the standard settings (at least for now) and just type "S" to move on to the next screen.
STEP 13
  • You'll then choose passwords.
  • WRITE THEM DOWN in several places.
 
STEP 14
 
  • While "Yes" is highlighted, press ENTER.
STEP 15
  • If you've done your job properly, you should see "ON LINE MODE."
  • Depending on your phone system, you may see either "APT Interface..." or "DPT..."
  • The POWER light on the voice processor should now be steady, not flashing.
  • If you want a quick thrill, use one of the system phones to call into the voice processor (usually Intercom, 165; but it may be a different number, depending on your phone system). DON'T follow the recorded instructions now -- it's for individual mailboxes.
  • Press ENTER
STEP 16
  • Enter your password.
  • If you are programming for the first time, type 1 for Program.
  • If your system is already set up, you can choose "Program" or another item.
  • Press ENTER.
 
STEP 17
  • Type 3 for "Port/Trunk Service" and press ENTER.
  • NEW OPTIONS: If you want to direct certain calls to specific destinations based on Caller ID or DID, use you cursor to highlight "Service Setting," then highlight "3.Intelligent Call Handling" in the next screen, and go to Step 33 below.
 
Caller ID Call Routing allows you to assign up to 200 Caller ID numbers and program the route for the calls from these assigned numbers to the desired extension, mailbox (including System Group Distribution List) or Custom Service.
The Company Greetings will not play when calls are routed as programmed by this feature.

DID Call Routing allows you to assign up to 200 DID numbers and program the route for calls from these assigned numbers to the desired extension, mailbox (including System Group Distribution List) or Custom Service. It also forwards "Private" (the caller’s number is not received) and "Out of Area" calls to a desired extension, mailbox or Custom Service.
The Company Greetings will not play when calls are routed as programmed by this feature.
Note: This feature is only available when the VPS is connected to the following PBXs with DPT Integration. • KX-TD816 (P311Q or higher) • KX-TD1232 (P211Q or higher) • KX-TD500 (V4M or higher). It requires an optional circuit module in your phone system, and DID service from your phone company.

 
STEP 18
  • Type 1 to select Port Service, and press ENTER.
  • Port Service is used if you want callers on all of your lines to reach the same menus.
  • Trunk Service is used if you want to have different menus for different lines. This is useful if several businesses, or a business and a home, share the voice processor.
  • If you want to use Trunk Service, select it and skip ahead to STEP 31XX?.
 
STEP 19
  • Type "1" to select Port 1, and then press ENTER.
  • Later, you can select other ports.
  • Type "1" to select Day Mode, and then press ENTER.
  • Later, you can select other day parts
 
STEP 20
  • In this screen, you can select a company greeting, which can be the first thing that callers hear. This is a brief announcement, such as "Thank you for calling Honest Charlie's Used Cars." If there is an emergency or temporary change in your company's schedule, you can call in from anywhere and change the opening message to something like "Thank you for calling Honest Charlie's Used Cars. Because of Hurricane Hilda, we will be closed until Wednesday," but you won't have to re-record your main menu.
  • Prompt 915 is an alternative to using Company Greetings, if you want the same announcement to reach callers on all lines at all times. Company Greetings are better if you want different greetings based on line or time. You can also use Prompt 915 plus a Company Greeting.
  • "Incoming Call Service" refers to the first menu people will hear. We recommend "Custom 1."
  • Leave the other settings alone, unless you have a good reason to change them.
  • Press the "\" (backslash) key.
STEP 21
  • Type 2 for "Night Mode"  and then press ENTER.
  • If you don't plan to use a night mode, we recommend that you set up a night mode identical to day mode, in case someone accidentally puts your system into night mode.
  • Later, you can select other day parts.

 

 
STEP 22
 
  • Select a Company Greeting (probably the same one you used before).
  • Select a Custom Service. If you don't want to use the highlighted service, type 4, and then type in a number to represent a different Custom Service. You can use "2" for your main night menu.
  • Press ENTER.
  • Leave the other settings alone, unless you have a good reason to change them.
  • Press the "\" (backslash) key.
STEP 23
  • Repeat steps 18 through 20 for all of your ports and day parts.
  • If you don't want different menus for lunch and break times, you don't have to program them.
  • If you don't want different settings for day and night, we recommend that you program the night modes anyway, identical to your day settings, in case the system accidentally goes into night mode.
STEP 24
  • Press the "\" (backslash) key several times to return to the Program Menu.
  • Type 4 for "Service Setting."
  • Press ENTER.
   
STEP 25
  • Type 2 for "Custom Service Settings."
  • Press ENTER.
  • Press ENTER.
  • NOTE: You can establish a maximum of 100 Custom Services with the possible depth of 8 layers. Someone will have to record Custom Service Menus so that callers will know which key to press.
 
STEP 26
  • The next screen is where you start to set up the menus that callers will hear.
  • Type 1 and press ENTER.
  • NOTE: You can establish a maximum of 100 Custom Services with the possible depth of 8 layers.
  • Someone will have to record Custom Service Menus so that callers will know which key to press.
 
STEP 27

You will now be able to start forming the actual menu, by associating an action with a caller's key stroke on a touchtone phone. It's a good idea to write out a script before you start programming the buttons.

Any key stroke can send the caller to a person, or to a group of people in a department, or to a mailbox, or to another menu, or to the main menu, or can repeat the current menu, or allow the caller to type in a few letters of a last name to reach someone, or do other things.

Create a “tree” diagram to design a route leading callers to the desired person, department, mailbox, or next menu. This tree should include all available caller options and cannot be deeper than eight layers. You might want to discuss available options with users before programming the system.

The top of the tree (at left below -- our tree fell down) should include what callers will hear after a brief company greeting. Then create a branch for each option. Fill in each box so you can easily see what action corresponds to each keystroke, and when you make your recordings later, make sure that your spoken message corresponds to the programming.

 
Remember that it is possible and often necessary to have one custom service lead to another custom service. For example, if someone presses [1] for sales, you might want another menu to say “for cars, press [1]; for trucks, press [2].” This way callers are routed directly to the person best suited to handle them.

The first menu (Custom 1) could be something like:

"If you know the extension number of the person you are calling, you can dial it at any time. For a staff directory, press one. To dial by name, press two. For sales, press three. For customer service, press four. For travel directions, press five. For our fax number, email address and website, press five. To repeat this menu, press six. Thank you."

You will work your way through all the buttons on a touchtone pad, starting with one.

 
STEP 28
Now you'll enter some settings that affect the way your first menu (custom service 1) works.
  • In "Description," enter a name that makes sense for you, such as "day menu."
  • In items 2 through 5, use the suggested settings. You can change them later if you have a good reason or just feel like playing around.
  • In item 6, you tell the voice processor where you want it to send callers who either have rotary-dial phones, or are too bewildered to do anything.
  • After typing in an entry, the cursor will automatically move to the next position.
  • If you press ENTER, the cursor will move to the next position.
  • You can also use the cursor to move left, right, up and down.
  • If you make a mistake, press the backslash button (\) to move back one screen, and then make your correction.
Maybe change the "Call Transfer Anytime" setting to "No."
This parameter specifies the destination to which the call will be transferred. The "Extn." setting (enter "E") enables callers to be transferred directly to their intended party by dialing the extension number. The "Mbx" setting (enter "M") enables callers to leave messages in a mailbox by entering the mailbox number. The "No" setting (enter "N") disables extension transfer and mailbox transfer; only 1-digit entries work (following the Custom Service menu).

This parameter should be set to "No" when Subscriber Service is specified as a Custom Service option and it is desired that digits can be entered very quickly to specify a destination. Therefore, in most cases, "No" is the best setting
for this parameter. This is especially true if you do not want to explain "Call Transfer Any Time" in your Custom
Service menu recording ("If you know the extension number for the person you are calling, you can enter it now.")
  • Don't change the "Wait for Second Digit" setting.
This parameter resolves the problem when the first digit of the extension or mailbox number is the same as one of the Custom Service menu choices. The VPS waits the specified period of time for a second digit to be dialed. If the time period expires without a second digit being entered, the system assumes the caller has selected a menu choice. Use this parameter only if "Call Transfer Anytime" is set to "Extn." or "Mbx".
  • "No DTMF Input Operation" determines what happens when a caller doesn't press any touch-tone button. By default, the call will go to the Operator, usually the person at phone #101. You can change the destination by typing in a letter representing one of the selections at the bottom of the screen.
  • After typing in an entry, the cursor will automatically move to the next position.
  • If you press ENTER, the cursor will move to the next position.
  • You can also use the cursor to move left, right, up and down.

 

STEP 29
Fill in the Keypad Assignments, by typing in appropriate letters and numbers.
  • You will now work your way through all the buttons on a touchtone pad, starting with zero.
  • We're showing just one here, but they all look the same.
  • Try to structure your menu with relatively few choices at each level (probably no more than 5). People often try to remember each choice while waiting to see if a better choice is offered, and it's hard to remember more than three.
  • If you offer lots of choices, make one choice to repeat the menu,
  •  such as "R" (7 on key pad) or "star."
  • Make sure you program some function for every possible keystroke on a touchtone pad. If you are only offering a few choices in a particular menu, program the other buttons to send the caller to a receptionist or someone else who can help, or make the extra buttons repeat the menu (type in the letter "l") or go back to the main menu (type "m").
  • Press the backslash key ("\") several times to reach "Program - Service Settings - Custom Service Settings" menu, and repeat steps 26 through 30 as needed, to create additional Custom Service menus.
  • When you are through entering menus, backslash out to the main page and then exit the program.
  • NOTE: Callers cannot jump between Custom Service menus more than 8 times.
STEP 30 - OPTIONAL! Trunk Service alternative to Port service
  • Type 1 for "Trunk Service," and press ENTER.
  • Type in the number of the first "Trunk Group" you want to program, and press ENTER.
NOTE: Where it says to enter a "Trunk Group Number," you enter a line number (the first line in your system is line one, or "trunk one"), then Day Mode.

This is really STOOOPID. A trunk group in the voice processor is a group of one line; it's not really a trunk or a group! HOWEVER, if you have a KX-TAW or KX-TDA phone system, it's not STOOOPID: you use the trunk group numbering you set up in the phone system programming.
 

Also, except for the KX-TAW and KX-TDA systems, a trunk group in the voice processor has nothing to do with a trunk group in the phone system, (also known as "CO Line Group," "Outside Line Group," "TRG," "TRK GRP," "lasagna" and "Harvey.")
 
STEP 31 - OPTIONAL! used for trunk service only
 
  • Use your cursor to select "Day Mode" and press ENTER. (The screen stupidly says "Return-Key").
  • You will next reach the "Program - Port/Trunk Service - Trunk Service - Day Mode Menu," which looks very much like the menu in Step 22 above, except it will say "Trunk" instead of "Port."
  • Follow steps 22 through 29, but think "Trunk" instead of "Port." To save space, we're not providing two sets of screen shots.
  • When you are through entering information, backslash out to the main page and then exit the program.
 
STEP 32 - OPTIONAL! Intelligent Call Handling Alternative
  • If you want callers to reach specific menus based on their Caller ID, type 2 for "Intelligent Call Handling," and press ENTER.
  • If you want callers to reach specific menus based on DID ("Direct Inward Dialing" service, type 3 for Intelligent Call Handling," press ENTER, and skip ahead to Step 37.
Caller ID Call Routing allows you to assign up to 200 Caller ID numbers and program the route for the calls from these assigned numbers to the desired extension, mailbox (including System Group Distribution List) or Custom Service.
The Company Greetings will not play when calls are routed as programmed by this feature. It also forwards "Private" (the caller’s number is not received) and "Out of Area" calls to a desired extension, mailbox or Custom Service. The Company Greetings will not play for calls forwarded by this feature. Services have this order of priority: Toll Saver > Holiday Service > Caller ID Call Routing > DID Call Routing > Trunk Service > Port Service (Toll Saver has the highest priority.)

DID Call Routing allows you to assign up to 200 DID numbers and program the route for calls from these assigned numbers to the desired extension, mailbox (including System Group Distribution List) or Custom Service. It also forwards "Private" (the caller’s number is not received) and "Out of Area" calls to a desired extension, mailbox or Custom Service.
The Company Greetings will not play when calls are routed as programmed by this feature.
Note: This feature is only available when the VPS is connected to the following PBXs with DPT Integration. • KX-TD816 (P311Q or higher) • KX-TD1232 (P211Q or higher) • KX-TD500 (V4M or higher). It requires an optional circuit module in your phone system, and DID service from your phone company.

 
STEP 34 - OPTIONAL! for Caller ID Routing only
  • Use your cursor to highlight "Enter" and press ENTER.
 
STEP 35 - OPTIONAL! for Caller ID Routing only
  • Enter a number for the first Caller ID entry, and press ENTER. This is NOT the phone number, just an identifying number for a position on the list. Start with "1."
STEP 36 - OPTIONAL! for Caller ID Routing only
  • Type in a phone number without spaces or punctuation.
  • Press ENTER. The system will then put hyphens into the digit  string.
  • Type in a description.
  • Press ENTER.
  • Indicate destinations for each day part by typing in letters from the bottom of the screen, and then specific destinations. Press ENTER after each entry.
  • "*" (star) substitutes any number (star = wild card). For example, to route all calls from Area Code 201, enter "201 * (star)".
  • To have a "Private" call (no CID provided) automatically forwarded to a desired destination, enter "P".
  • For an "Out of Area" call, enter "O".
  • When you are through with this page, press backslash ("\") to return to the menu shown in in STEP 35, so you can enter another phone number if you like.
  • When you are through entering phone numbers, backslash out to the main page and then exit the program.
STEP 37 - OPTIONAL! for DID Routing only
  • Type 1 for "Enter" and press ENTER.
 
STEP 38 - OPTIONAL! for DID routing only
  • Enter a number for the first DID entry, and press ENTER. This is NOT the phone number, just an identifying number for a position on the list. Start with "1."
STEP 39 - OPTIONAL! for DID routing only
  • Type in a DID phone number without any spaces or punctuation, and press ENTER. The system will then put hyphens into the digit  string.
  • Type in a description to identify the person being called, and press ENTER.
  • Indicate destinations for each day part by typing in letters from the bottom of the screen, and then specific destinations. Press ENTER after each entry.
  • When you are through with this page, press backslash ("\") to return to the menu shown in in STEP 38, so you can enter another phone number if you like.
  • When you are through entering phone numbers, backslash out to the main page and then exit the program.
STEP 40 - Recording Menus 
  • Once you have finished entering the settings for each digit in each menu, the menu "messages" or "prompts" should be recorded. Menu messages tell the caller what options are available and what keys correspond to those options, so the messages must match the programming.
  • You can't make these recordings if your PC is still connected for programming.
  • (NEW in 25-series) If you hear "You can not access this service," you are being blocked by System Security.

IMPORTANT: Unless you make changes, the first thing that callers will hear will be "good morning" or "good afternoon" or "good evening" and "welcome to the voice processing system." These prerecorded phrases are called System Prompts.

 

You can eliminate or modify these prompts if you want to, so callers will hear your own message as soon as the system answers.

 
>>IMPORTANT: Make sure you have selected "User 1" not "system" prompt in the custom service setting menus, and the port service or trunk service menus, or your changes will not take effect. <<
  1. Access the "Message Manager's Main Command Menu": dial the intercom number for the voice processor (usually 165, unless you used a different number), then press  #, 6, *, 998 (or 98 for the KX-TD308). Enter your password, followed by #.
    >>IMPORTANT: This will not work if a PC is still connected and in the programming mode.<<
  2. Press [5] to modify messages.
  3. Press [6] to modify the user prompts,
  4. Press [1] to change user prompt 1.
  5. Press [1] if you want to re-record a prompt with your own voice, or press [2] if you want to re-record several prompts.
  6. Enter the prompt number you want to change. (NOTE: These have changed from previous systems.)
    • Prompt 915 is "welcome to the voice processing system."
    • Prompt 273 is "good afternoon."
    • Prompt 274 is "good evening."
    • Prompt 275 is "good morning."
  7. Continue following instructions. You can press 3 to turn off a prompt.

 

The next sequence shows you how to record the custom service menus.
  1. Access the "Message Manager's Main Command Menu": dial the intercom number for the voice processor (usually 165), then press  #, 6, *, 998 (or 98 for the KX-TD308).
    >>IMPORTANT: This will not work if a PC is still connected and in the programming mode.<<
  2. Press [5] to modify messages.
  3. Press [4] to change the custom service menu.
  4. You will hear: "Enter the Custom Service number [1] through [100]. To record the Custom Service Exit prompt, press [0]."
  5. Press the button on your touchtone pad corresponding to the custom service menu you want to record or change.
  6. Follow the instructions until all Custom Service prompts have been recorded, using the tree that you created as a guide.
  7. After you have entered and recorded all menus, it is important to try the program yourself to see that all functions perform properly. Dial into the system and try all the choices to see if you are routed correctly. Verify that each menu choice works as it should.

 


   IMPORTANT: People should learn how to use the system, and should record their names and mailbox messages. Click for our User Guides

 
STEP 41 - OPTIONAL! toll saver

This new feature permits someone to check his/her mailbox from pre-assigned Caller ID numbers or by dialing a pre-assigned DID number without telephone charges. When called from the assigned number, the VPS notifies the caller whether or not there is a new message in is mailbox by changing the delayed answer time (see Table B-19). The caller can reduce the telephone charges by entering her/his mailbox only when there is a new message. If this feature is activated, the caller will access his/her mailbox directly.

NOTE: DID number setting for this feature is only available when the VPS is connected to the following PBXs with DPT Integration. • KX-TD816 (P311Q or higher) • KX-TD1232 (P211Q or higher) • KX-TD500 (V4M or higher)

To access the menu for Toll Saver Parameter, follow the menu path as shown: System Administration Top Menu-1-4-4.

See page 318 in your installation manual.

 
STEP 42 - OPTIONAL! holiday setting

You can program special settings for up to 20 Holiday Services. On the day(s) specified as holiday(s), settings in this parameter have priority over settings for Trunk Service, Port Service and Caller ID Call Routing.

When setting specific day(s) as holiday(s), you have the following 2 options:
• The first option is to specify a single day on which to enable the Holiday Service setting. For example, you can specify  New Year’s Day as a holiday.
• The second option is to specify a range of days to enable the Holiday Service setting on all days within the specified range. For example, you can specify the start and end dates of your Christmas vacation.

NOTE: Holidays cannot overlap. For example, if you have set Dec. 22nd to Jan. 6th as holidays, you cannot set Jan. 1st as a holiday.

To provide a special message to callers on a holiday (for example, "Today is New Year’s Day and our office is closed. If you wish to record a message, please press 1 now".), you can create a Custom Service menu. Use this setting to direct calls to this Custom Service on Jan. 1st.

To access the menu for Holiday Setting, follow the menu path as shown:System Administration Top Menu-1-5-3

To access the menu for Holiday Setting-Enter, follow the menu path as shown: System Administration Top Menu-1-5-3-1-

See page 326 in your installation manual.

 
STEP 43 - OPTIONAL! daylight saving time adjustment
 
This feature adjusts the internal clock of the VPS to the starting and ending date of daylight saving time.

To access the menu for Daylight Saving Time, follow the menu path as shown: System Administration Top Menu-1-5-4

See page 328 in your installation manual.

 

STEP 44 - OPTIONAL! caller name announce
 
  • Up to 120 Caller ID numbers can be assigned to announce prerecorded Caller ID caller names when extension users listen to messages from the assigned numbers left in their mailbox.
  • Extension users can also hear caller names when the VPS forwards calls from the assigned numbers to them (Caller ID Screening).
  • The recorded caller names will also play when the callers use the Intercom Paging features; the recorded names will be added to the end of the page.
  • The Caller ID Screening feature is enabled or disabled in the COS (Class of Service) settings. This feature is also enabled by selecting "Call Screening" in 4.1 Call Transfer Status in the Subscriber’s Guide.
  • The Intercom Paging feature is enabled by selecting "Intercom Paging" in 4.1 Call Transfer Status, and/or in 4.3 Incomplete Call Handling Status in the Subscriber’s Guide.
  • The Message Manager is responsible for recording System Caller Names.
  • See page 331 in your installation manual.
 
STEP 45 - OPTIONAL & IMPORTANT! system security
 
  • The 25 series voice processors have improved security features, that may be a PITA if you are not aware of them.
  • To access the menu for System Security, follow the menu path as shown: System Administration Top Menu-1-5-7

  • The "System Administrator" (person doing the programming) should set a password for the "System Manager" and "Message Manager," who may all be the same person. The managers have access to mailboxes 998 and 999, for such functions as recording Custom Service menus and establishing mailboxes.
  • Use your cursor to highlight the item you want to change and type in an entry based on the choices at the bottom of the screen.
  • The "System Administrator" (person doing the programming) can set automatic passwords for user mailboxes with several different formats. The default password is the mailbox number. You can also select :
    1:1+Mailbox No. 2:2+Mailbox No. 3:3+Mailbox No. 4:4+Mailbox No. 5:5+Mailbox No. 6:6+Mailbox No.
    7:7+Mailbox No. 8:8+Mailbox No. 9:9+Mailbox No.
  • See page 332 in your Installation Manual
STEP 46 - OPTIONAL changing pre-recorded voice prompts
 
There are over 1000 voice prompts, and they come in 3 types:
(1) System Prompts—in English (cannot be modified but can be turned off).
(2) User 1 Prompts—recordable (they can replace System Prompts).
(3) User 2 Prompts—in Spanish (can be erased or modified).
  • You can replace the pre-recorded prompts with another voice.
  • If you want to make changes, it is usually not necessary to re-record all the voice prompts (recording hundreds of voice prompts is a BIG undertaking).
  • When an outside caller reaches the voice processor, he or she only hears some of the prompts. Therefore, it is necessary only to record or modify these prompts.
  • Change prompts as needed for your application. For example, prompt no. [915] could be "Thank you for calling ABCD Travel", instead of "Welcome to the Voice Processing System".
  • The maximum length of a prompt is six minutes.
These are the most common modifiable prompts:

273 Good afternoon
274 Good evening
275 Good morning
915 Welcome to the Voice Processing System
752 To enter by name, press the pound sign and 1
152 Enter the first 3 or 4 letters of the person’s last name
221 For ’Q’, press 7
222 For ’Z’, press 9
556 Sorry, there are no more matching names
564 Sorry, this name cannot be found
303 Incorrect entry
299 If you are using a rotary telephone, stay on the line
678 To call the operator, press 0
60 Calling the operator
467 Please wait a moment
914 Welcome to the general delivery mailbox
466 Please leave a message at the tone
744 To end recording, hang up or press 1 for more features
 

 
>>IMPORTANT: Make sure you have selected "User 1" not "system" prompt in the custom service setting menus, and the port service or trunk service menus, or your changes will not take effect. <<
  1. Access the "Message Manager's Main Command Menu": dial the intercom number for the voice processor (usually 165, unless you used a different number), then press  #, 6, *, 998 (or 98 for the KX-TD308). Enter your password, followed by #.
    >>IMPORTANT: This will not work if a PC is still connected and in the programming mode.<<
  2. Press [5] to modify messages.
  3. Press [6] to modify the user prompts,
  4. Press [1] to change user prompt 1.
  5. Press [1] if you want to re-record a prompt with your own voice, or press [2] if you want to re-record several prompts.
  6. Enter the prompt number you want to change. (NOTE: These have changed from previous systems.)
    • Prompt 915 is "welcome to the voice processing system."
    • Prompt 273 is "good afternoon."
    • Prompt 274 is "good evening."
    • Prompt 275 is "good morning."
  7. Continue following instructions. You can press 3 to turn off a prompt.

© 2004 AbleComm, Inc. All rights reserved.

voiceprocessor.info/prog-25.htm updated 14 OCT 04

   

 

pg 29